полировка ремонт vertu сертифицированный

To determine these variables, the following parameters will be monitored:
- The amount of landfill gas fed to the flare (LFGflare,y) will be measured continuously using a continuous flow meter.
- The fraction of methane in the landfill gas (wCH4,y) will be measured with a continuous gas analyzer. The continuous gas analyzer is the preferred option because the methane content of landfill gas captured can vary by more than 20% during a single day due to gas capture network conditions (dilution with air at wellheads, leakage on pipes, etc.).
- Temperature (T) and pressure (p) of the landfill gas will be measured to determine the density of methane in the landfill gas.
- The flare efficiency (FE), measured as the fraction of time in which the gas is combusted in the flare multiplied by the efficiency of the combustion process. For this purpose, the methane content of the flare emissions should be analysed on a yearly basis, with the first measurement to be made at the time of installation. The combustion efficiency is initially assumed at 97% and will be periodically verified through laboratory analysis to determine the methane content in the flare emissions.
- The quantities of electricity or any other fuels required to operate the landfill gas project, including the pumping equipment for the collection system.
- Relevant regulations for LFG project activities will be monitored. Changes to regulation will be converted to the amount of methane that would have been destroyed/combusted during the year in the absence of the project activity (MDreg,y).

Проект www.rus-abc.com соответствует следующим стандартам: информационное насыщение, продвижение.